MOBILE STATION
Copyright © Zhengzhou shenghe grinding technology co., LTD. 豫ICP备190123456号 Powered by www.300.cn
News
News
NEWS CENTER
-
The casting industry in China has been developing in recent years
Is China foundry production country, the domestic casting serious overproduction, but our country's casting refers to the low end of the casting in our country serious overcapacity excess capacity, China's high-end castings produced in is difficult to meet the needs of the market, therefore, demand the low-end castings production capacity of casting industry in China into
2019-07-19
-
How long after coating can be put into use
1. When the environment is higher than 25 ° c, the curing speed will be accelerated. The coating time after mixing A and B adhesive should be appropriately shortened. And the dosage of each mixing should not be too much, about 1-1.5kg. Generally, it can be completely cured at this temperature for 24 hours and put into use.
2019-07-19
-
The application of wear-resistant coatings for large particles and small particles
Wear-resistant coating thickness is related to the spraying process, the process is different, there are differences in the thickness of small particles wear-resistant particle adhesive and large particles wear-resistant particle adhesive: wear-resistant particle adhesive is in accordance with the size of the diameter of nano-ceramic particles as the distinction, can be divided into small particles wear-resistant particle adhesive
2019-07-19
Page up
1
Page down